Welcome to the official website of Chuanghui Electric Heater in Yancheng!
盐城市创惠电热科技有限公司
张天:15895191047
杜文华:13961983587
许中勇:13962067633
邮箱:1249802206@qq.com
地址:江苏省盐城市盐都区顺丰物流园2号楼403室
网址: www.chdrkj.com
The heater is a combined unit composed of fan, motor and air heater. Applicable to all types of workshop, when the air does not contain dust and flammable or explosive gases, the heater manufacturer can be used as circulating air heating. The heater can be used as heating independently, usually to supplement the insufficient part of the radiator or to use the radiator as on-duty heating, and the rest of the heat load is borne by the heater.
The schematic diagram of the components of the heater is shown below. It is a heating unit composed of fan 1, motor 2 and heat exchanger 3. Under the dynamic action of fan 1, air enters the unit from suction port 6, and is heated when it flows through air heat exchanger 3. It flows out of the unit from outlet 7 to heating space and causes indoor air circulation. The outlet has a guide vane 4 for adjusting the direction of the outlet.
As the end device of hot water or steam heating system, the heater can be divided into hot water heater and steam heater according to the heat medium. The former uses hot water as heat medium, and the latter uses steam as heat medium.
There are two types of fans for heater: axial flow fan and centrifugal fan. Axial fan is often used in small units, centrifugal fan is often used in large units. Small heaters have NC, NF, S, TS, NA and other models, large heaters have NBL, NLGS and other models.
Zhang Tian:15895191047
Du Wenhua:13961983587
Xu Zhongyong:13962067633
mailbox:1249802206@qq.com
address:Shunfeng Logistics Park, Yandu District, Yancheng City, Jiangsu Province
Website: www.chdrkj.com
manager zhang | Alibaba |