Welcome to the official website of Chuanghui Electric Heater in Yancheng!
盐城市创惠电热科技有限公司
张天:15895191047
杜文华:13961983587
许中勇:13962067633
邮箱:1249802206@qq.com
地址:江苏省盐城市盐都区顺丰物流园2号楼403室
网址: www.chdrkj.com
Electric heating oil heater and oil thermostat are safe, energy-saving and environmentally friendly. They are widely used. As a machine, to prolong its service life, heating platform manufacturers must maintain and maintain it well. In order to avoid frequent failure of oil cycle temperature control machine, how should we detect oil cycle temperature control machine in the working process? The maintenance of oil cycle temperature control machine is divided into weekly maintenance and monthly maintenance. What should be done next? Oil circulation temperature controller is more important than oil. Hot oil should control the temperature of mould products and how to clean and maintain hot oil.
Purchase a new electric heating oil heater, check the flow of cooling water before use, to prevent the lack of cooling water and damage the mold temperature machine. We should keep the working environment of the mould temperature machine clean and avoid dust, which can greatly prolong the service life of the electrical components of the mould temperature machine.
1. We bought a new electric and thermal conductive furnace. Before use, please check whether the cooling water is recycled to prevent damage caused by insufficient cooling water to the electric heat conduction furnace. We should keep the working environment clean and avoid dust, which can greatly prolong the service life of electrical components of electric heating oil furnace.
2. Different maintenance measures should be taken according to the different heat conducting media used in the new electric oil heat conducting furnace. For the medium is water, we should keep the water source clean, so that it is not easy to scale, but also to prevent pipeline blockage. For CNOOC, we need to replace it regularly according to the operating temperature. For medium-sized oils above 200, we need to replace them every two months. For medium oil below 200, we can replace it quarterly.
3. In the pipeline, it is necessary to judge whether the pipeline is blocked or not according to the relationship between pump and pressure. If the pressure is too low, we can take out the heating pipe and clean it with tools, especially the filter cover at the entrance of the system, preferably once a month.
4. Check periodically whether the pump and oil pump of the water temperature machine leak oil, and replace the seal of the pump shaft periodically when necessary.
Zhang Tian:15895191047
Du Wenhua:13961983587
Xu Zhongyong:13962067633
mailbox:1249802206@qq.com
address:Shunfeng Logistics Park, Yandu District, Yancheng City, Jiangsu Province
Website: www.chdrkj.com
manager zhang | Alibaba |