Welcome to the official website of Chuanghui Electric Heater in Yancheng!
盐城市创惠电热科技有限公司
张天:15895191047
杜文华:13961983587
许中勇:13962067633
邮箱:1249802206@qq.com
地址:江苏省盐城市盐都区顺丰物流园2号楼403室
网址: www.chdrkj.com
Five minutes to solve the problem of heating coil without heating easily. Operate the following solutions: first, turn off the power supply of heating coil, remove the wire of heating coil, check whether the heating coil is burnt with a multimeter, replace the burned coil immediately, and solve the problem. Solution of no strong electricity output for copper casting heating ring manufacturer: Check the strong electricity used for heating ring of electric heating ring and check it with multimeter. The general problem of Nanjing cast copper heating ring is that the heating switch trips or burns out. The tripping switch is re-turned off and pushed up. If the power is broken, the problem will be solved. Solution to burnout of contactor: First, check whether the control power supply of contactor is electric or not, check whether the contactor is loose or not, tighten the connector with screwdriver after loosening off the power, cast copper heating ring connector is broken, replace it. Pay attention to marking each line to prevent the back from being unclear. Solution of contactor uncontrolled power supply: The control power supply is generally no output power on the 10 board of the computer. There are two problems in general. One is the burnout of the fuse, the other is the burnout of the output point. If the fuse burns out and replaces the fuse, the problem can be solved. If the output point is broken, the standby output or repair 10 boards can be solved.
Zhang Tian:15895191047
Du Wenhua:13961983587
Xu Zhongyong:13962067633
mailbox:1249802206@qq.com
address:Shunfeng Logistics Park, Yandu District, Yancheng City, Jiangsu Province
Website: www.chdrkj.com
manager zhang | Alibaba |