Cast aluminium electric heater is a kind of Diecasting electric heater with tubular electric heating element as heating body and high quality casting material as shell. Its temperature is generally between 150 and 450 degrees Celsius. It can be widely used in plastic machinery, die head, cable machinery, chemical industry, rubber, petroleum and other equipment. Cast aluminium heater has the advantages of long life, good thermal insulation, strong mechanical properties, corrosion resistance and magnetic field resistance. Exd II BT4 ExD II BT6 Exde II CT6 and so on are the explosion-proof marks of the explosion-proof heater. The cast aluminium electric heater is a kind of high-efficiency heater with uniform heat division and excellent thermal conductivity of metal alloy, which ensures the uniform temperature of the hot surface and eliminates the hot and cold points of the equipment. It has the advantages of long life, good thermal insulation, strong mechanical properties, corrosion resistance and magnetic field resistance. Cast aluminium heating platform manufacturer will increase the thermal insulation device on the external heat sintering surface and sinter infrared radiation on the internal heat sintering surface, which can save 35% of the electricity consumption.

Cast aluminium electric heater is a kind of electric heater.

Varieties of electric heaters include: cast aluminium heater, cast iron heater, quartz tube heater, stainless steel electric heating pipe, No. 10 steel heating pipe, heating pipe with winding radiator, VC443, VC442, VC441, VC432 induction heater, hot plate assembly, vacuum diffusion pump electric heating plate, dust-free heater, thermocouple, high temperature wire, ceramic heating tile, resistance wire and other specifications.

The series of heater products: resistance wires are imported nickel-chromium wire, high-quality insulation materials. It has the characteristics of reasonable design, fine processing, accuracy, high thermal efficiency, energy saving, safety and reliability.

Usage and maintenance:

1. First, check whether the power supply voltage at the site of use is in accordance with the rated voltage of this product. If it is different, it should be equipped with the same power supply voltage as the rated voltage of this product.

2. In order to ensure safety, keep in mind that the shell of electrical equipment should be grounded reliably.

3. When the product of electric heater is in use for more than three months, it should be self-drying intermittently under permissible conditions, heating for 10 minutes and power failure for half an hour, three or four times in a row to discharge the humidity inside the electric heating element.

4. Electric heaters should be kept moistureproof and corrosive during storage and stored in well-ventilated places.

Instructions:

1) The working voltage shall not exceed 10% of the rated value;

2) The wiring part should be placed outside the heating layer and insulation layer, and the shell should be effectively grounded.

3) Should be placed in a dry place, if the insulation resistance is less than 1M due to long-term placement, it can be baked in an oven of about 200 degrees Celsius for 5-6 hours, and then it can return to normal.

Profile of Cast Aluminum Heater