With the development of industrial production and the progress of science and technology, the heat conducting oil heater has been continuously developed and applied. Therefore, the manufacturers of cast aluminium heating platforms must attach great importance to the safe operation and management of heat conducting oil heaters.

How to maintain the heat conducting oil heater in normal use? As a high-quality heating equipment, the maintenance of heat conducting oil heater is particularly important. Gino Thermal Conductive Oil summarizes the following maintenance methods for you

(1) The electric control cabinet should avoid dust accumulation and be cleaned regularly with compressed air to ensure good electrical contact.

(2) Heat conducting oil heater boiler heat conducting oil should not exceed the maximum allowable temperature. Hot oil sampling test is usually carried out every 2 to 3 months after half a year of use, and attention should be paid to different oils not to mix.

(3) Thermal conductive oil heater boilers should check the thermometer regularly and measure regularly to prevent the increase of thermal resistance of temperature measuring nodes, resulting in incorrect temperature operation.

(4) Installation of circulating pipelines should facilitate the discharge of gases from the pipelines. If the circulation pipeline leaks, it should stop running in time and repair it before use.

(5) When it is difficult to improve oil temperature and heat conducting oil heater during operation, should immediately check whether the pipeline is unblocked, whether the valve is wrong, whether the filter is blocked and other phenomena, before use, should be deleted, the filter should be removed and cleaned regularly.

(6) Users should customize detailed operation procedures and regular maintenance system. Operators should be familiar with and master the operation points of equipment.

(7) Electric heat pipe contacts, fuses, meters, electrical contact pressure gauges and relays should be checked regularly.

(8) Because of the use of precise instruments, the boiler with heat conducting oil heater is strictly prohibited from shaking sharply during transportation and installation. Good maintenance and maintenance of hot oil heater can prolong the service life of equipment, maximize its working efficiency, and ensure the safe and stable operation of the whole production process.

(9) After replacing the heating elements, the wiring must be reliable, and the leakage detection of the heater must be carried out to prevent the leakage of heat conducting oil and the bad contact of the conductors, resulting in fire accidents.

The above is the maintenance method of heat conducting oil heater. Operators should make necessary preparations and inspections before operating the equipment.