Welcome to the official website of Chuanghui Electric Heater in Yancheng!
盐城市创惠电热科技有限公司
张天:15895191047
杜文华:13961983587
许中勇:13962067633
邮箱:1249802206@qq.com
地址:江苏省盐城市盐都区顺丰物流园2号楼403室
网址: www.chdrkj.com
During the use of high watt density single-end electric heat pipe, due to its rapid heating and poor heat dissipation conditions, it often results in blackness, oxidation and deformation of the external stainless steel tube body. As a result, the internal heating element-electric heat alloy wire is broken by high temperature air burning, which shortens the life of the single-end electric heat pipe itself. Therefore, a good single-end electric heat pipe not only needs to produce good quality, but also requires the material of the die. With the processing aperture (the closer the aperture is to the diameter of the tube), the suitable aperture of the single-end heating tube is not only convenient for replacing the single-end heating tube, but also conducive to the conduction of heat energy between the two, thus prolonging the service life of the heating tube itself.
Precision should be paid attention to in deep hole processing of dies, not drilling at both ends, because the junction can not be closed and there are large holes, so that the heat dissipation of heating pipe is poor, and the temperature of heated body is uneven.
It should be noted that the magnesia powder at the outlet of the electric heating pipe should not be permeated by pollutants and water in the use place, so as to prevent leakage of electricity, and 5 mm can be reserved outside the die.
Electric heat pipe can be preheated for 5 minutes to avoid leakage danger due to humid air or moisture infiltration into the pipe. Grounding wires must be installed in the use of electrothermal machinery.
Zhang Tian:15895191047
Du Wenhua:13961983587
Xu Zhongyong:13962067633
mailbox:1249802206@qq.com
address:Shunfeng Logistics Park, Yandu District, Yancheng City, Jiangsu Province
Website: www.chdrkj.com
manager zhang | Alibaba |