Welcome to the official website of Chuanghui Electric Heater in Yancheng!
盐城市创惠电热科技有限公司
张天:15895191047
杜文华:13961983587
许中勇:13962067633
邮箱:1249802206@qq.com
地址:江苏省盐城市盐都区顺丰物流园2号楼403室
网址: www.chdrkj.com
1 heating time
Under test voltage, the time from ambient temperature to test temperature should not be more than 15 minutes.
2 rated power deviation
Under sufficient heating conditions, the deviation of the rated power of the component shall not exceed the range specified below.
For the components whose rated power is less than or equal to 100W, it is: +10%.
For components with rated power greater than 100W, the larger value of the two is +5%-10% or 10W.
3 Leakage current </DIV>
Leakage current in cold state and after water pressure and seal test shall not exceed 0.5mA.
The thermal leakage current at working temperature should not exceed the calculated value in the formula, but the maximum leakage current should not exceed 5mA for single-end heating pipe manufacturers.
I = 1/6 (tT x 0.00001)
I-Hot Leakage Current mA
T-heating length mm
T-working temperature
When multiple components are connected in series to the power supply, leakage current test should be carried out with these components as a whole.
4 Insulation Resistance
Cold insulation resistance should not be less than 50M in factory inspection
After sealing test, the insulation resistance after long-term storage or use should not be eliminated with M_
The thermal insulation resistance at working temperature should not be lower than the calculated value in the formula, but the minimum should not be less than 1M_.
R="(10-0.015T)/t"*0.001
R-Thermal Insulation Resistance M_
T-heating length mm
T-Working Temperature
5 Insulation Voltage Resistance Strength
Components shall be maintained for 1 min under specified test conditions and test voltage without flashover and breakdown
6. Ability to withstand power-on and power-off
Components shall be able to undergo 2000 power-on and power-off tests under specified test conditions without damage.
7 overload capacity
Components shall withstand 30 cycles of overload tests under specified test conditions and input power without damage.
8 heat resistance
Components shall withstand 1000 cycles of heat resistance tests under specified test conditions and test voltage without damage.
Zhang Tian:15895191047
Du Wenhua:13961983587
Xu Zhongyong:13962067633
mailbox:1249802206@qq.com
address:Shunfeng Logistics Park, Yandu District, Yancheng City, Jiangsu Province
Website: www.chdrkj.com
manager zhang | Alibaba |