Quality Stainless Steel Electric Heating Plate

The laying area of electric heating plate is only 60% of the practical area. The manufacturer of stainless steel heating plate can use it in different sections. Place the electric heating board flat in the place where it needs to be installed. Pay attention to one end of the junction box of the electric heating board in the same control area and place it in the same direction nearest to the thermostat. Make sure that the distance between the switch of the power thermostat and the electric heating board is not more than one meter. The plastic sheet with the same thickness as the electric heating plate is used between the electric heating plate and the wall and between the temperature control section.

Thermostat

Temperature controller is divided into single control and double control. Shanghai heating pipe double control can control two sections at the same time, that is, 1 control and 2 control. Shanghai heating pipe should pay attention to each control to control up to 5 electric heating plates.

Blue Line: Zero Line (Common Line)

Red line: 1 control switch fire line;

Yellow line: 2 control switch fire line;

Multi-specification, fully combined electric heating plate can meet your different needs. According to the usage area, electrically heated boards with different specifications and powers are directly installed in any flat place such as Kang surface, bed surface, floor and so on. Shanghai heating pipe is easy to disassemble and assemble, and can be installed and used by oneself. The construction is convenient and fast, and can be used after laying.

Appearance Structure of Electric Heating Plate

1. Plate 2. Connection box (left) 3. Connection box (right) 4. Temperature sensor.

Installation and use of tools

1. Stripping pliers 2. Pressing pliers 3. Scissors 4. Wallpaper knife 5. Electrical adhesive tape 6. Connection cap